Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® A3K FC Aqua UN - PA66 - BASF

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 模塑测量的特殊性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

Ultramid® A3K FC Aqua UN is optimized for plastic parts, mandatory requiring material approvals for drinking water or direct food contact.

The product is approved according to
• 21 CFR FDA § 177.1500 "Nylon resins" (except contact with alcoholic beverages)
• European Food Contact European Food Contact Commission Regulation (EU) 10/2011
• GMP (EC) n°2023/2006

and provides the approvals for drinking water regulations of
• KTW
• DVGW W270
• WRAS
• ACS (disclosure of ingredients)
• NSF (disclosure of ingredients)

For questions regarding the compliance with further regulations, and certificates, please contact your local BASF representative or Plastics Safety (E-Mail: plastics.safety@basf.com).

加工/物理特性	干 / 已调节	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	115 / *	cm³/10min	ISO 1133
温度	275 / *	°C	-
载荷	5 / *	kg	-
模塑收缩率, 平行	1.6 / *	%	ISO 294-4, 2577
模塑收缩率, 垂直	1.8 / *	%	ISO 294-4, 2577

机械性能	干 / 已调节	单位	Test Standard
ISO数据
拉伸模量	3100 / 1100	MPa	ISO 527
屈服应力	85 / 50	MPa	ISO 527
屈服伸长率	5 / 20	%	ISO 527
名义断裂伸长率	30 / >50	%	ISO 527
弯曲模量, 23°C	2900 / -	MPa	ISO 178
拉伸蠕变模量, 1h	* / 1100	MPa	ISO 899-1
拉伸蠕变模量, 1000h	* / 700	MPa	ISO 899-1
无缺口简支梁冲击强度, +23°C	N / N	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	5 / 20	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	4 / -	kJ/m²	ISO 179/1eA
悬臂梁缺口冲击强度, +23°C	5.5 / N	kJ/m²	ISO 180/1A
悬臂梁缺口冲击强度	6 / -	kJ/m²	ISO 180/1A
悬臂梁缺口冲击强度 - 温度	-30	°C	-

热性能	干 / 已调节	单位	Test Standard
ISO数据
熔融温度, 10°C/min	260 / *	°C	ISO 11357-1/-3
玻璃化转变温度, 10°C/min	72 / *	°C	ISO 11357-1/-2
热变形温度, 1.80 MPa	75 / *	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	220 / *	°C	ISO 75-1/-2
维卡软化温度, B	250 / *	°C	ISO 306
线性热膨胀系数, 平行	98 / *	E-6/K	ISO 11359-1/-2
1.5mm名义厚度时的燃烧性	V-2 / *	class	IEC 60695-11-10
测试用试样的厚度	1.6 / *	mm	-
燃烧性－氧指数	28 / *	%	ISO 4589-1/-2

电性能	干 / 已调节	单位	Test Standard
ISO数据
相对介电常数., 100Hz	3.8 / -	-	IEC 62631-2-1
相对介电常数., 1MHz	3.2 / 5	-	IEC 62631-2-1
介质损耗因子, 100Hz	50 / -	E-4	IEC 62631-2-1
介质损耗因子, 1MHz	250 / 2000	E-4	IEC 62631-2-1
体积电阻率	1E13 / 1E10	Ohm*m	IEC 62631-3-1
表面电阻率	* / 1E10	Ohm	IEC 62631-3-2
相对漏电起痕指数	- / 600	-	IEC 60112

其它性能	干 / 已调节	单位	Test Standard
吸水性	8.5 / *	%	类似ISO 62
吸湿性	2.8 / *	%	类似ISO 62
密度	1130 / -	kg/m³	ISO 1183
Bulk density	700	kg/m³	-

模塑测量的特殊性能	干 / 已调节	单位	Test Standard
ISO数据
粘数	150 / *	cm³/g	ISO 307, 1157, 1628

函数

典型数据

加工方法

注塑, 其它挤出成型

供货形式

粒料, 自然色

添加剂

润滑剂, 脱模助剂

特殊性能

经热稳处理的/耐热的

Certifications

可食品接触的, 10/2011认证, FDA 21 CFR认证, 可水接触的, 可水接触的(KTW), 可水接触的(DVGW W270), NSF认证 61

应用

汽车

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

其他信息

注塑成型

PREPROCESSING
Pre/Post-processing, max. allowed water content: .15 %
Pre/Post-processing, Pre-drying, Temperature: 80 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 280 - 300 °C
injection molding, Melt temperature, recommended: 290 °C
injection molding, Mold temperature, range: 60 - 80 °C
injection molding, Mold temperature, recommended: 60 °C
injection molding, Dwell time, thermoplastics: 10 min

耐化学性

酸类
	醋酸 (5g/100g) (23°C)
	柠檬酸溶液 (10g/100g) (23°C)
	乳酸 (10g/100g) (23°C)
	盐酸 (36g/100g) (23°C)
	硝酸 (40g/100g) (23°C)
	硫酸 (38g/100g) (23°C)
	硫酸 (5g/100g) (23°C)
	铬酸溶液 (40g/100g) (23°C)
碱类
	氢氧化钠溶液 (35g/100g) (23°C)
	氢氧化钠溶液 (1g/100g) (23°C)
醇类
	异丙醇 (23°C)
	甲醇 (23°C)
	乙醇 (23°C)
碳氢化合物
	正乙烷 (23°C)
	甲苯 (23°C)
	异辛烷 (23°C)
酮类
	丙酮 (23°C)
醚类
	(二)乙醚 (23°C)
矿物油
	SAE 10W40号多效润滑油 (23°C)
	SAE 10W40号多效润滑油 (130°C)
标准燃油
	柴油(优先使用F类ISO 1817液体) (23°C)
	柴油(优先使用F类ISO 1817液体) (>90°C)
盐溶液
	氯化钠溶液(10g/100g) (23°C)
	次氯化钠溶液 (10g/100g) (23°C)
	氯化锌溶液 (50g/100g) (23°C)
其它
	乙酸乙酯 (23°C)
	过氧化氢 (23°C)
	DOT4号刹车油 (130°C)
	乙二醇水溶液 (50g/100g) (108°C)
	水 (23°C)

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.